®

CASSINO 500 Bollard

HOUSING
Single 6060 aluminum alloy rear sidewall and front ledge mount to the square cast aluminum base with concealed hardware. Sidewall and ledge are 0.60'' thick. Sidewall has two ribs attached to the inner side to provide positive alignment of the lens. Matte acrylic cubic lens with integral flange has single white acrylic panel bonded to the outer surface to align the lens assembly to the luminaire sidewall. Two cast aluminum fascia elements seal the lens assembly to the single piece EPDM gasket on the base and are secured with countersunk stainless steel screws. Luminaire mounts to 0.197'' thick wall extruded aluminum shaft with two concealed socket head cap screws. All hardware is stainless steel.

OPTICS
Single COB LED directs light upward through matte acrylic lens producing soft diffused illumination.

ELECTRICAL
Input voltage to universal LED driver is 120v through 277v AC, 50/60 Hz. Drive current to LED is 450 mA for 16 watt model and 620 mA for 24 watt model.

DELIVERED LUMENS / BUG RATING
Standard Output:16 watts
3000K: 642 lumens / B0-U3-G1
4000K: 699 lumens / B0-U4-G1

High Output: 24 watts
3000K: 917 lumens / B0-U4-G1
4000K: 1147 lumens / B0-U4-G1

NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

WEIGHT
17 lbs

MOUNTING
Bollard mounts to anchor base plate assembly with four M10 x 20mm stainless steel socket head cap screws and washers. Anchor base assembly consists of four 1/2'' x 17'' x 3'' hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others).

FINISH
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.