®

VILLAGE 375 LVC

HOUSING
Ringed cage is fabricated from high strength 6061 aluminum alloy. Clear cast seamless acrylic cylindrical lens assembly twists onto mounting plate at the top of the cage assembly and is secured with three socket head cap screws. Lens is sealed with one-piece silicone gasket. Weather-tight connectors provided for power in and out. All hardware is stainless steel.

OPTICS
Optical assembly consists of one LEVO C LED module mounted within the cylindrical clear acrylic lens. The module consists of an aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, IV, or V optics. LED circuit boards are equipped with electrical disconnects to allow for future technology upgrades. CRI is 80+.

ELECTRICAL
Electronic LED driver supplies 700mA drive current to the LED module with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 37 watts. Luminaire is pre-wired for 0-10v dimming and wire-through power. Standard 40' power cable length. Additional cable lengths over 40' available. Installation of electrical cables (by others) requires drip loop per applicable local and national electrical codes. Cable for drip loop installation is provided. Drip loop must be located near the fixture per local and national electrical codes.

DELIVERED LUMENS/ BUG RATING
3000K
Type 2 = 3248 lumens / B1-U1-G1
Type 3 = 3356 lumens / B1-U2-G1
Type 4 = 3261 lumens / B1-U1-G1
Type 5 = 3542 lumens / B2-U1-G1

4000K
Type 2 = 3456 lumens / B1-U1-G1
Type 3 = 3571 lumens / B1-U2-G1
Type 4 = 3469 lumens / B1-U1-G1
Type 5 = 3768 lumens / B2-U1-G1

NOTE:
Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

MOUNTING
Articulating cable hanger assembly is machined aluminum and is adjustable to level the luminaire. Cable hanger assembly will accommodate 1/4" - 1/2" diameter stainless steel cable. Side mounted 1/8" - 1/4" stainless steel stabilization cables (by others) attach to eyelets on opposite sides of the luminaire cage with swaged end fittings. (Structural design, stainless steel catenary and stabilization cables, and fittings for mounting to support structure provided by others). Contact factory for fitting suppliers.

WEIGHT
30 lbs
EPA: 3.1 sq ft

FINISH:
Standard Primar® finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.