top of page

ILLUMINATING
BOLLARD

CASSINO

CASSINO 900
CASSINO 500
CASSINO 290

CASSINO 900

CASSINO 500

CASSINO 290

CASSINO's simple lines enhance any site without diminishing the architecture. Translucent acrylic lens creates soft diffused illumination. Housing is constructed of cast aluminum and heavy aluminum plate. Fixture and heavy wall extruded aluminum shaft are finished in finely textured paint. Luminaire is available in three heights. All hardware is stainless steel.

CASSINO FAMILY

CASSINO WALL MOUNT

CASSINO WALL MOUNT

csm_CE180_ProdGrp_d75fb35f18_edited.png

CASSINO 900 Bollard

HOUSING
Single 6060 aluminum alloy rear sidewall and front ledge mount to the square cast aluminum base with concealed hardware. Sidewall and ledge are 0.60'' thick. Sidewall has two ribs attached to the inner side to provide positive alignment of the lens. Matte acrylic cubic lens with integral flange has single white acrylic panel bonded to the outer surface to align the lens assembly to the luminaire sidewall. Two cast aluminum fascia elements seal the lens assembly to the single piece EPDM gasket on the base and are secured with countersunk stainless steel screws. Luminaire mounts to 0.197'' thick wall extruded aluminum shaft with two concealed socket head cap screws. All hardware is stainless steel.

OPTICS
Single COB LED directs light upward through matte acrylic lens producing soft diffused illumination.

ELECTRICAL
Input voltage to universal LED driver is 120v through 277v AC, 50/60 Hz. Drive current to LED is 450 mA for 16 watt model and 620 mA for 24 watt model.

DELIVERED LUMENS / BUG RATING
Standard Output:16 watts
3000K: 642 lumens / B0-U3-G1
4000K: 699 lumens / B0-U4-G1

High Output: 24 watts
3000K: 917 lumens / B0-U4-G1
4000K: 1147 lumens / B0-U4-G1
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

WEIGHT
CS900
24 lbs
CS500
17 lbs

MOUNTING
Cassino 900 and 500 mount to anchor base plate assembly with four M10 x 20mm stainless steel socket head cap screws and washers. Anchor base assembly consists of four 1/2'' x 17'' x 3'' hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others).

FINISH
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.

CASSINO
CASSINO

ORDER INFORMATION

Model

CS900 - 35.4" Bollard

Mounting

LED Module

SO - Standard Output  |  HO - High Output

Pole

Color Temperature

30K - 3000K  |  40K - 4000K

Control

DIM - 0-10v Dimming

Volt

UNV - 120-277v

Distrubution

Top Lens Color

Finish

BL - Black  |  DB - Dark Bronze  |  DG - Dark Grey  |  GG - Graphite Grey  |  SG - Silver Grey  |  CC - Custom RAL Color

Option

Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
Add a Title

<product>

<oi model>

<product>

<oi model>

bottom of page