®

CENTO 780 Bollard

HOUSING
Cylindrical luminaire base, and top cap are precision machined from 6060 aluminum. Cylindrical housing with 180-degree lens aperture is fabricated from 6060 aluminum tubing with nominal wall thickness of 0.197" and mounts to three concealed anchor rods. Cylindrical matte acrylic lens mounts to the base inside the housing. Luminaire top cap mounts to the cylindrical housing with three captive socket head caps screws and provides access to luminaire for relamping. Luminaire base and top cap are grooved to accept one-piece silicone gasket to provide weather-tight seal to the lens. All hardware is stainless steel.

OPTICS
Nine high-power LEDs mounted to aluminum core circuit board within a circular array are mounted to the top cap, which acts as an additional heatsink for enhanced thermal management. Individual LEDs fitted with narrow beam lenses to project light output downward along the length of the matte acrylic lens, producing softly diffused illumination through the 180° aperture.

ELECTRICAL
Electronic LED driver with input voltage range from 120v to 277v at 50/60Hz supplies 700mA drive current to LED module. Total power consumption is 21 watts.

LAMPING
Source: LED
Delivered Lumens: 537 lms
Color Temperature: 3000K
CRI: 80+
Power Consumption: 21 watts
BUG Rating: B0-U3-G1
Source: LED
Delivered Lumens: 732 lms
Color Temperature: 4000K
CRI: 80+
Power Consumption: 21 watts
BUG Rating: B0-U3-G1

MOUNTING
Bollard mounts to anchor rods embedded in concrete (by others). Four 3/8" x 10'' x 2'' hot-dip galvanized anchor rods secure luminaire. Optional soil insert available on request.

WEIGHT
31 lbs

FINISH
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.