ILLUMINATING
BOLLARD

PARCO

®

Click for more information

PARCO 900

PARCO 900 AMBER

PARCO® illuminates pathways with gracefully iconic styling and state of the art LED technology. The compact luminaire housing integrates into the gently arched bollard shaft for a semi-regressed appearance. The fully shielded luminaire emits zero uplight. It is suitable for LEED zones 1 through 4 and is Dark Sky compliant. PARCO® is crafted from 6061-T6 aluminum with subtle design features such as concealed anchor bolts and absence of visible welds. All hardware is stainless steel.

PARCO FAMILY

PARCO POLE

PARCO® 900 Bollard

HOUSING
Single piece bollard with integral mounting base is fabricated from 6061 T6 aluminum. Bollard shaft has nominal wall thickness of 0.125" and shall show no visible welds. Luminaire housing is extruded aluminum and semi-regressed within in the bollard shaft. Lens is clear tempered glass. LED light engine and driver are housed within a self contained power pack installed in the luminaire and is removable with a single tamper-proof fastener. The LED light engine is thermally managed using convection and heat transfer through the use of an aluminum heat sink and the luminaire housing. All hardware is stainless steel.

OPTICS
LED light engine consists of three high output, multi-chip LED arrays fitted with prismatic lens optics to produce a uniform asymmetric light distribution pattern suitable for pathways and sidewalks. Luminaire emits zero uplight at or above 90 degrees horizontal and qualifies for use in LEED zones LZ1, LZ2, LZ3, and LZ4. Color temperature may be 3000K or 4000K with CRI greater than 80.

ELECTRICAL
Integral LED driver is housed within the luminaire head and consumes 11 watts at 350 mA. Input voltage range is 120v - 277v AC, 50-60 Hz. High power factor LED driver shall be UL recognized.

LED DELIVERED LUMENS / BUG RATING
3000K - 462 delivered lumens / B0-U0-G0
4000K - 496 delivered lumens / B0-U0-G0
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

MOUNTING
Removable door at the rear of the base allows access to the internal mounting flange. Hardware for the installation plate includes hex nuts and washers for leveling and fastening. Four hot-dip galvanized anchor bolts for embedment into concrete foundation (by others) may be pre-shipped on request.

FINISH
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

CERTIFICATION
CSA/US Certified for Wet Locations

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.