PORTAL EXIT
PORTAL EXIT
The PORTAL EXIT bollard delivers an exterior rated architectural solution for visual guidance and messaging. Suitable for outdoor applications ranging from rooftop pool decks and gardens to courtyards, the slender rectangular form integrates comfortably into a variety of architecture. The extruded aluminum bollard is available with green or red letters. Custom signage, logos, or patterns may also be incorporated on request. Concealed mounting plate assembly delivers a clean, flangeless appearance. All hardware is stainless steel. CSA Certified for Wet Locations and UL924 compliant.
PORTAL FAMILY
PORTAL BENCH
PORTAL BOLLARD
PORTAL EXIT Bollard
HOUSING
Outdoor rated ext bollard is fabricated from high strength 6061-T6 extruded aluminum alloy with nominal thickness of 0.187" and cross-section of 12" x 3". Overall height is 39.4". Top plate for access to light engine is machined aluminum with beveled edges and secured with tamper-resistant countersunk screws. Six inch tall lettering is available in green or red to meet local or state codes. All hardware is stainless steel.
OPTICS
Low power LEDs on flexible film behind a matte acrylic lens with colored film provide illumination of exit sign lettering. Bollard is available with green or red lettering.
ELECTRICAL
UL recognized electronic LED driver is housed in a weather-proof enclosure and supplies 350 mA drive current to the LEDs. Universal driver accepts 120v through 277v input voltage at 50/60 Hz. Power consumption is 9 watts.
MOUNTING
Bollard mounts to concealed mounting plate assembly. Mounting plate assembly consists of fabricated aluminum mounting base which installs onto three 1/2" x 15" x 3" diameter hot-dip galvanized anchor rods embedded in concrete foundation provided by others. Bollard secures to the mounting assembly with two recessed setscrews. Contact factory for alternate mounting methods.
FINISH CERTIFICATION
CSA/US Certified for Wet Location.
CERTIFICATION
CSA/US Certified for Wet Location. Complies with UL924 standards.
WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
ORDER INFORMATION
Model
PTL1000E-S - 39.4" Exit Bollard (Single Face) | PTL1000E-D - 39.4" Exit Bollard (Double Face)
Mounting
LED Module
(For Single Face) L - Left Chevron | R - Right Chevron | D - Left & Right Chevron | N - No Chevrons
(For Double Face) LR - Left/Right Chevron | D - Left & Right Chevron | N - No Chevrons
Pole
Color Temperature
(Letter Color) G - Green | R - Red
Control
Volt
UNV - 120-277v
Distrubution
Top Lens Color
Finish
BL - Black | DB - Dark Bronze | DG - Dark Grey | GG - Graphite Grey | SG - Silver Grey | CC - Custom RAL Color
Option
TVSS20 - 20KV Surge Suppressor