ILLUMINATING
BOLLARD

RENO

®

Click for more information

RENO

RENO's linear form adds a simple accent to contemporary architecture. Rectangular column and bollard are fabricated from aluminum extrusions and panels. Top mounted light source allows easy access and increased efficiency. Matte acrylic lenses generate softly diffused illumination, while effectively highlighting the profile. All hardware is stainless steel.

RENO FAMILY

RENO COLUMN

RENO Bollard

HOUSING
Rectangular shaft is fabricated from 6061 aluminum extrusions and aluminum sheet. Hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Machined aluminum top cap provides access to CoB LED and reflector located at the top of the bollard. Top cap is secured to bollard with four captive stainless steel socket head cap screws and is sealed to the housing with one-piece die-cut silicone gasket. Square lenses on main width of the bollard and narrow rectilinear lenses on adjacent sides are matte acrylic with textured finish. Lenses are gasketed to provide a weather-tight seal to the housing. Nominal bollard height is 43" with a cross section of 11.6" x 4.9".

OPTICS
Top mounted CoB LED and medium beam reflector projects light downward and outward through four lenses on the bollard. Interior of housing is painted white to provide even illumination through all four lenses. Two square lenses provide accenting, while two rectilinear lenses provide primary illumination.

ELECTRICAL
Electronic LED driver supplies 500mA drive current to LED modules with input voltage range from 120v to 277v at 50/60Hz. Total power consumption is 21 watts. 0-10v dimming available on request. Electronic driver is housed within a weatherproof enclosure that is accessed via the hand hole.

DELIVERED LUMENS / BUG RATING
3000K: 1495 lumens / B1-U4-G1
4000K: 1854 lumens / B1-U4-G2
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

MOUNTING
Bollard with internal flange mounts to four 0.5" diameter x 15" x 3" galvanized steel anchor bolts embedded into concrete foundation provided by others. Bollard with external flange includes base cover. Bollard mounts to four 0.5" diameter x 15" x 3" anchor bolts and is embedded into a paper template.

FINISH
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

CERTIFICATION
CSA/US Certified for Wet Locations

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.