top of page
Hess-white.png

ILLUMINATING
BOLLARD

RIVA

RIVA

RIVA

Simple lines typify the RIVA bollard. The base housing is precision- machined from billet aluminum, then satin anodized. The matte acrylic cylindrical lens diffuses light uniformly. Inverted tapered shaft of cast aluminum is finished in finely textured paint to create a unique appearance. Bollard is secured to ground mounting assembly with stainless steel socket head cap screws. All hardware is stainless steel.

RIVA FAMILY

RIVA WALL MOUNT

RIVA WALL MOUNT

csm_CE180_ProdGrp_d75fb35f18_edited.png

RIVA POLE MOUNT

RIVA Bollard

HOUSING
One-piece luminaire base housing is precision-machined from 6060 billet aluminum, then satin anodized. Cylindrical matte acrylic lens mounts to luminaire base and is secured with three button head cap screws. Luminaire assembly fastens to the one-piece cast aluminum inverted tapered bollard shaft with three concealed socket head cap screws and is sealed with one-piece closed cell silicone gasket. Electronic driver mounts to bracket on the underside of the housing and is housed in the top of the bracket. All hardware is stainless steel.

OPTICS
Single CoB with CRI greater than 80 works in conjunction with high efficiency white polycarbonate reflector to project light upward and outward to produce a Type V distribution. Matte acrylic lens diffuses light output while minimizing brightness.

ELECTRICAL
Input voltage to high power factor universal LED driver is 120v through 277v AC, 50/60 Hz. Drive current to LEDs is 350 mA. Power consumption is 13 watts. Power factor is greater than 0.90. Minimum starting temperature for driver is -30°C (-22°F). Driver shall be UL Recognized.

LED DELIVERED LUMENS / BUG RATING
3000k: 1128 lumens / B0-U4-G1
4000k: 1192 lumens / B0-U4-G1

MOUNTING
Inverted tapered bollard shaft with integral flange plate is cast aluminum with nominal wall thickness of 0.24''. Bollard shaft mounts to anchor base plate assembly with four M10 x 20mm stainless steel socket head cap screws. Anchor base assembly consists of four 3/8'' x 10'' x 1-1/2'' hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others). See pole data sheet for mounting details.

FINISH
Housing is satin anodized aluminum. Standard finishes for bollard shaft are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

WEIGHT
12 lbs

CERTIFICATION
CSA/US Certified for Wet Locations

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.

RIVA
RIVA

ORDER INFORMATION

Model

RV900 - 35.4" Bollard

Mounting

LED Module

Pole

Color Temperature

30K - 3000K  |  40K - 4000K  |  50K - 5000K

Control

DIM - 0-10v Dimming

Volt

UNV - 120-277v

Distrubution

Top Lens Color

Finish

BL - Black  |  DB - Dark Bronze  |  DG - Dark Grey  |  GG - Graphite Grey  |  SG - Silver Grey  |  CC - Custom RAL Color

Option

TVSS20 - 20KV Surge Suppressor

<product>

<oi model>

<product>

<oi model>

Hess-red.png
bottom of page