PALERMO 220

IN-GROUND
LUMINAIRE

PALERMO

PALERMO 220

PALERMO G adds a touch of elegance to architectural spaces with its brushed stainless steel detailing. The housing is cast from copper-free aluminum and treated with a proprietary anti-corrosive powder coat finish for long-term durability. Optics may be symmetric with spot, medium, and flood beam patterns for accenting as well as asymmetric for wall-washing. LED model is available in white light for accenting or in single colors for way marking or creative effects. Optional concentric ring louvers (HID) for shielding and anti-slip lens treatment are available on request. Luminaire is suitable for pedestrian walkover applications. All hardware is stainless steel. CSA Certified for Wet Locations.

PALERMO 220 LED
HOUSING
Clear tempered glass lens with decorative ceramic masking is 0.47" thick and bonded to square 316L stainless steel trim ring with high-grade automotive quality adhesive with UV, acid, and alkali resistance properties. Lens assembly fastens to the housing from the underside with stainless steel hardware. Single piece nitrile gasket provides weather-tight seal between the lens assembly and housing. Heavy wall luminaire housing is cast from Anticorodal aluminum alloy and finished with proprietary epoxy based powder coat finish. Housing is void of threads to prevent scratching of the paint and potential resulting corrosion. Underside of housing is protected from abrasions with Teflon pads at contact points to the factory-supplied PVC installation steel. Weather tight bushing is supplied for the power cord.

OPTICS
Choice of optics include symmetric distributions with beam spreads of 9°, 24°, or 38°. Asymmetric distribution with 19° x 50° is also available. LEDs are fitted with prismatic lens optics to achieve available distribution patterns.

ELECTRICAL
Electronic LED driver rated for 700mA drive current. Input voltage range is 120v through 277v at 50/60Hz. Power consumption is 18 watts.

LED DELIVERED LUMEN OUTPUT
3000K
9° Beam: 759 lms
24° Beam: 791 lms
38° Beam: 803 lms
Asymmetric: 692 lms

4000K
9° Beam: 812 lms
24° Beam: 846 lms
38° Beam: 859 lms
Asymmetric: 740 lms

5700K
9° Beam: 827 lms
24° Beam: 862 lms
38° Beam: 875 lms
Asymmetric: 754 lms

BUG RATING
B0-U4-G0 for all models.
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

MOUNTING
Luminaire mounts into PVC installation sleeve and is retained in place via stainless steel spring clips. Installation sleeve may be pre-shipped on request.

WEIGHT: 18lbs
IP67

FINISH
Housing is cleaned in an ultrasonic detergent bath prior to painting. Standard housing finish is proprietary epoxy based powder coat paint and is not visible when installed.

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.