top of page

LED TILE/STRIP
LUMINAIRE

LEDIA LL

LEDIA LL
LEDIA LL RGB

LEDIA LL

LEDIA LL RGB

Elegant in any context, LEDIA LL is ideally suited to a variety of recessed inground applications. It is available in four lengths. Frameless glass lens integrates subtly into pavers or concrete walkways to highlight or act as directional identifiers. The tempered glass lens, coated internally with a translucent white coating, is bonded to the stainless steel housing providing a sealed enclosure. LEDIA mounts into a recessed stainless steel subframe, which serves as a cable vault for making power connections. Color-changing RGB LEDs require remote 12v DC LED driver and 3-channel dimmer or sequencer.

Available Tile Sizes:
9" - LEDIA LL 09 RGB
18" - LEDIA LL 18 RGB
27" - LEDIA LL 27 RGB
36" - LEDIA LL 36 RGB

LEDIA FAMILY

LEDIA LF OUTDOOR

LEDIA LF OUTDOOR

csm_CE180_ProdGrp_d75fb35f18_edited.png
csm_CE180_ProdGrp_d75fb35f18_edited.png
LEDIA LL WALL

PRODUCT COLUMN

PRODUCT CATENARY

LEDIA LL WALL

LEDIA LL RGB

HOUSING
Machined tempered glass lens is 0.75'' thick and bonded to the stainless steel luminaire housing providing a sealed enclosure. Exterior surface of lens is polished with chamfered edges. Underside of lens is diffused. LED light engine housing is constructed of stainless steel. All internal components are sealed to prevent moisture entry. Luminaire mounts into stainless steel sub-frame where electrical connections are made. Luminaire is supplied with removable extruded aluminum form for rough-in installation. Recessed frame and removable form may be pre-shipped upon request.

OPTICS
Low wattage LED's provide even illumination across the entire lens surface.

9" - LEDIA LL OD 09
WEIGHT: 3.3 lbs
Maximum power consumption: 5 watts

18" - LEDIA LL OD 18
WEIGHT: 6.6 lbs
Maximum power consumption: 9 watts

27" - LEDIA LL OD 27
WEIGHT: 9.9 lbs
Maximum power consumption: 13 watts

36" - LEDIA LL OD 36
WEIGHT: 13.2 lbs
Maximum power consumption: 16 watts

ELECTRICAL
Remote 60w power supply is sold separately and may be used to power multiple luminaires. LED power supply requires 120v input and provides 12v DC to luminaire. Luminaire is supplied with pigtail connectors and waterproof wire nuts. Wiring from LED power supply to luminaire and wiring between luminaires shall be UL Listed direct burial cable with minimum 18 AWG wire supplied by others. Optional 3 channel dimming module and RGB color sequencers, suitable for dry locations, are available and require a 0-10v DC voltage controller (by others).
NOTE: Due to rapid and continuous advances in solid state lighting technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. HessAmerica cannot guarantee consistency in color, color temperature, CRI, or brightness when matching existing luminaires due to lumen depreciation and improvements in existing technology.

WARRANTY
Limited product warranty period including the LEDs is five years. LED driver (ordered separately) and optional dimming module shall carry the respective manufacturer's limited warranty.

LEDIA LL
LEDIA LL RGB

ORDER INFORMATION

Model

LEDIA-LL

Length

09 - 9"  |  18 - 18"  |  27 - 27"  |  36 - 36"

CCT

RGB - COLOR CHANGING

Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
Add a Title

<product>

<oi model>

<product>

<oi model>

bottom of page