®

CANTO 450 LVC
HOUSING
One-piece domed housing is heavy cast aluminum. Hinged frameless lens is tempered glass and sealed to the housing with one-piece closed cell silicone gasketing. Reflector plate is painted with high reflectance white paint. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. Luminaire installs onto bracket mounting plate with four socket head cap screws. All hardware is stainless steel.

OPTICS
Optics includes two individual LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+.

ELECTRICAL
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 72 watts. Optional 0-10v DC dimming is available on request.

DELIVERED LUMENS - 3000K and 4000K BEAM SPREAD
Based on standard 5 degree tilt.
For 0 degree tilt option, U rating = 0.

3000K
Type II: 6795 lumens / B1-U1-G1
Type III: 6460 lumens / B2-U1-G1
Type IV: 6079 lumens / B1-U1-G2

4000K
Type II: 7378 lumens / B1-U1-G1
Type III: 7014 lumens / B2-U1-G1
Type IV: 6600 lumens / B1-U1-G2

NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

POLE
Fabricated aluminum bracket arm bolts to the pole 1.9' from the top with stainless steel fasteners. Square tubing welded to the underside of the bracket arm acts as a wire way for the luminaire power cable. Round and curved steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.157''. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Pole and luminaire mounting bracket are hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Two-piece base cover with tamper-proof fasteners is fabricated from 0.080'' spun aluminum and finished to match the pole. Nominal pole height is 16'.

FINISH
Standard PRIMAR® finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special RAL colors
available on request.

INGRESS PROTECTION:
IP65

CERTIFICATION
UL Listed for Wet Locations.

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.