®

CANTO 600 LVC
HOUSING
One-piece domed housing is heavy cast aluminum. Hinged frameless tempered glass lens opens with single quarter-turn fastener for easy relamping. Lens is sealed to the housing with one-piece closed cell silicone gasketing. Hinged reflector plate, painted with high reflectance white paint, swings down allowing access to ballast components. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. Luminaire installs onto bracket mounting plate with four socket head cap screws. All hardware is stainless steel.

OPTICS
Optics include a choice of two or three individual LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+.

ELECTRICAL
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 72 watts for models with two modules and 108 watts for models with three modules. Optional 0-10v DC dimming is available on request.

LED DELIVERED LUMENS OUTPUT / BUG RATING - Based on standard 5 degree tilt. For 0 degree tilt option, U rating = 0.
3000K 2 Modules
TYPE II = 6795 LMS / B1-U1-G1
TYPE III = 6460 LMS / B2-U1-G1
TYPE IV = 6079 LMS / B1-U1-G2

3000K 3 MODULES
TYPE II = 10193 LMS / B2-U1-G2
TYPE III = 9690 LMS / B2-U1-G2
TYPE IV = 9118 LMS / B2-U1-G2

4000K 2 MODULES
TYPE II = 7378 LMS / B1-U1-G1
TYPE III = 7014 LMS / B2-U1-G1
TYPE IV = 6600 LMS / B1-U1-G2

4000K 3 MODULES
TYPE II = 11068 LMS / B2-U1-G2
TYPE III = 10522 LMS / B2-U1-G1
TYPE IV = 9900 LMS / B2-U1-G2

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for more current technical data.

POLE
Fabricated aluminum bracket arm bolts to the pole 2.3' from the top with stainless steel hardware. Square tubing welded to the underside of the bracket arm acts as a wire way for the luminaire power cable. Round straight steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.177''. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Pole and luminaire mounting bracket are hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Two-piece base cover with tamper-proof fasteners is fabricated from 0.080'' spun aluminum and finished to match the pole. Specify 21' or 28' nominal pole height.

FINISH
Standard PRIMAR® finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special RAL colors available on request.

INGRESS PROTECTION:
IP65

CERTIFICATION
UL Listed for Wet Locations.

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.