®

CANTO 450 Wall

HOUSING
One-piece domed housing is heavy cast aluminum. Hinged frameless tempered glass lens opens with single quarter-turn fastener for easy relamping. Lens is sealed to the housing with one-piece closed cell silicone gasketing. Hinged reflector plate, painted with high reflectance white paint, swings down allowing access to ballast components. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. Luminaire installs onto bracket mounting plate with four socket head cap screws. All hardware is stainless steel.

OPTICS
LED light engine consists of a vertically oriented optical quality acrylic rod capped with a reflective element to redirect light outward. The acrylic rod channels light from the single CoB LED and redirects it outward to provide effective horizontal and vertical illumination. Light shaping diffusing film on the inside of the main luminaire lens controls and shapes light distribution for optimal performance while minimizing brightness. Thermal management is provided via heat sinking and convective cooling within the sealed system.

ELECTRICAL
Electrical components are mounted in a white conical enclosure at the base of the luminaire. Electronic LED driver supplies 700mA drive current to the LED. The driver has a universal input voltage range from 120v to 277v at 50/60Hz. Driver is high power factor with performance greater than 90%. Power consumption is 24 watts. Optional 0-10v dimming available on request.

LED DELIVERED LUMENS / BUG RATING
Based on standard 5° tilt. For 0° tilt option, Urating = 0.

3000K
2 MODULES
TYPE II = 6795 LMS / B1-U1-G1
TYPE III = 6460 LMS / B2-U1-G1
TYPE IV = 6079 LMS / B1-U1-G2

3000K
3 MODULES
TYPE II = 10193 LMS / B2-U1-G2
TYPE III = 9690 LMS / B2-U1-G2
TYPE IV = 9118 LMS / B2-U1-G2

4000K
2 MODULES
TYPE II = 7378 LMS / B1-U1-G1
TYPE III = 7014 LMS / B2-U1-G1
TYPE IV = 6600 LMS / B1-U1-G2

4000K
3 MODULES
TYPE II = 10168 LMS / B2-U1-G2
TYPE III = 10522 LMS / B2-U1-G2
TYPE IV = 9900 LMS / B2-U1-G2

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

MOUNTING
Fabricated steel bracket arm is constructed from single formed steel plate and mounts over junction box to the surface in four places. Square tubing welded to the underside of the bracket arm acts as a wire way for the luminaire power cable. Mounting bracket is hot-dip galvanized, then lightly sanded prior to painting.

FINISH
Housing is cleaned ultrasonically prior to painting. Standard Primar® finishes are finely textured dark grey, graphite grey, silver grey, black, and dark bronze. Special RAL colors available on request.

WEIGHT: 30 lbs LUMINAIRE

EPA: 1.0 SQ FT

INGRESS PROTECTION: IP65

CERTIFICATION
CSA Certified For Wet Locations

WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer’s limited warranty.