FIDENZA
FIDENZA 150W
Vertical planes with a slim profile define FIDENZA, adding an unobtrusive linear accent to contemporary interiors and outdoor spaces. The fabricated aluminum luminaire is fully shielded and includes an integral driver with minimal power consumption. FIDENZA emits zero uplight and is suitable for LEED lighting zones 1 through 4 and is Dark Sky compliant. All hardware is stainless steel.
FIDENZA FAMILY
FIDENZA BOLLARD
FIDENZA 150
HOUSING
Vertically oriented planar housing and wall bracket are fabricated from 6060 aluminum. Flat lens is clear acrylic. All hardware is stainless steel.
OPTICS
LED light engine with electrical disconnect is to flush mounted to the aluminum plate inside the housing. Six LEDs with individual refractive lenses are positioned within the cylindrical housing providing asymmetric distribution with zero uplight.
ELECTRICAL
Input voltage to universal high power factor LED driver is 120v through 277v AC, 50/60 Hz. Drive current to LEDs is 350 mA. Power consumption is 8 watts.
LED DELIVERED LUMENS / SYSTEM WATTS / BUG RATING
3000K: 129 LMS / B0-U1-G
4000K: 155 LMS / B0-U1-G0
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
MOUNTING
Standard:
Luminaire is supplied with stainless steel mounting bracket and miniature junction box. Stainless steel mounting bracket is secured to the junction box with two stainless steel screws, providing a mounting surface for the luminaire. The luminaire engages the mounting bracket and is secured with a single stainless steel screw from the top, concealed from normal viewing angles. Miniature junction box may be pre-shipped in advance on request.
Adapter Plate for 3.5" or 4" Octagon Box:
Machined aluminum adapter plate with universal hole pattern mounts to 3.5" or 4" octagon box with two screws. Stainless steel luminaire mounting bracket and decorative machined aluminum cover plate mounts over the adapter plate, providing a mounting surface for the luminaire. Luminaire engages with the stainless steel mounting bracket and is secured with single stainless steel screw from the top of the luminaire housing. Decorative cover plate is finished to match the luminaire.
FINISH
Housing is cleaned ultrasonically prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
WEIGHT: 6 lbs
WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer's limited warranty.
ORDER INFORMATION
Model
FD150W
LED Module
Color Temperature
30K - 3000K | 40K - 4000K
Control
Volt
UNV - 120-277V
Distribution
Beam
Finish
BL - Black | DB - Dark Bronze | DG - Dark Grey | GG - Graphite Grey | SG - Silver Grey | CC - Custom RAL Color
Option
AP - Adapter for plate mounting over 3.5" or 4" octagon box
<product>
<oi model>
<product>
<oi model>
