GENUA
GENUA 150W
Horizontal and vertical planes intersect to fashion a contemporary linear luminaire well suited for upscale interiors and outdoor spaces. The fabricated aluminum luminaire is fully shielded and includes an integral driver with low power consumption. GENUA emits zero uplight and is suitable for LEED lighting zones 1 through 4 and is Dark Sky compliant. All hardware is stainless steel.
GENUA FAMILY
GENUA BOLLARD
GENUA 150
HOUSING
Horizontally oriented planar housing and wall bracket are fabricated from 6060 aluminum extrusion. Flat lens is clear acrylic. All hardware is stainless steel.
OPTICS
LED light engine with electrical disconnect is to flush mounted to the aluminum plate inside the housing. Twelve LEDs with individual refractive lenses are positioned within the cylindrical housing providing asymmetric distribution with zero uplight.
ELECTRICAL
Universal high power factor LED driver accepts 120v through 277v AC, 50/60 Hz input and is integral to the luminaire housing. Drive current to LEDs is 350 mA. Power consumption is 14 watts.
LED DELIVERED LUMENS / SYSTEM WATTS / BUG RATING
3000K: 481 LMS / B0-U1-G0
4000K: 581 LMS / B0-U1-G0
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
MOUNTING
Standard:
Luminaire is supplied with stainless steel mounting bracket and miniature junction box. Stainless steel mounting bracket is secured to the junction box with two stainless steel screws, providing a mounting surface for the luminaire. The luminaire engages the mounting bracket and is secured with a single stainless steel screw from the top, concealed from normal viewing angles. Miniature junction box may be pre-shipped in advance on request.
Adapter Plate for 3.5" or 4" Octagon Box:
Machined aluminum adapter plate with universal hole pattern mounts to 3.5" or 4" octagon box with two screws. Stainless steel luminaire mounting bracket and decorative machined aluminum cover plate mounts over the adapter plate, providing a mounting surface for the luminaire. Luminaire engages with the stainless steel mounting bracket and is secured with single stainless steel screw from the top of the luminaire housing. Decorative cover plate is finished to match the luminaire.
FINISH
Housing is cleaned ultrasonically prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer's limited warranty.
ORDER INFORMATION
Model
GN150W
LED Module
Color Temperature
30K - 3000K | 40K - 4000K
Control
Volt
UNV - 120-277V
Distribution
Beam
Finish
BL - Black | DB - Dark Bronze | DG - Dark Grey | GG - Graphite Grey | SG - Silver Grey | CC - Custom RAL Color
Option
AP - Adapter for plate mounting over 3.5" or 4" octagonal box
<product>
<oi model>
<product>
<oi model>
