®

TRENTO 150W

HOUSING
Housing consists of cylindrical matte acrylic lens retained by two lens rings mechanically fastened together with three internal aluminum support rods. Lens rings are precision-machined from 6082 billet aluminum, then satin anodized. Lens rings have machined groove for one-piece EPDM gasket to provide a weathertight seal to the lens. Outer lens ring has circular aperture for diffused end lens. Tempered glass end lens is white flashed opal glass, sealed to the lens ring with one-piece closed cell silicone gasket. Luminaire mounts to machined aluminum back plate housing the lamp and electrical components with three recessed setscrews. Back plate is satin anodized to match luminaire and gasketed to provide a weather-tight seal to the housing. Back plate mounts to the wall surface over 3.5'' octagon junction box with factory-supplied wall anchors. All hardware is stainless steel.

OPTICS
CoB LED is positioned within the matte acrylic cylindrical lens providing diffuse symmetrical distribution. Diffused end lens provides subtle radiant glow.

ELECTRICAL
Input voltage to universal LED driver is 120v through 277v AC, 50/60 Hz. Drive current to LEDs is 350 mA. Power consumption is 14 watts.

LED DELIVERED LUMENS / SYSTEM WATTS / BUG RATING
3000K: 1051 LMS / B0-U3-G1
4000K: 1084 LMS / B0-U3-G1

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

FINISH
Standard finish is satin anodized aluminum.

WEIGHT: 5.5 lbs

INGRESS PROTECTION: IP54

CERTIFICATION
CSA Certified for Wet Locations

WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer's limited warranty.