WALL
MOUNT

VILLAGE

®

Click for more information

VILLAGE 375

The contemporary form of VILLAGE adds a minimalist accent to modern architecture. Fabricated aluminum housing encircles the clear acrylic cylindrical lens. Optics include a choice of symmetric or asymmetric distributions. Electrical components are housed in a spun aluminum enclosure and mounted in the luminaire. Luminaire and bracket are finished in finely textured paint. All hardware is stainless steel.

VILLAGE FAMILY

VILLAGE POLE MOUNT

VILLAGE CATENARY

VILLAGE 375 Wall

HOUSING
Ringed cage is fabricated from high strength 6061 aluminum alloy. Clear acrylic cylindrical lens assembly twists onto mounting plate at the bottom of the cage assembly and is secured with three socket head cap screws. Lens is sealed with one-piece silicone gasket. Power cable is sealed with weather-tight bushing. All hardware is stainless steel.

OPTICS
Optical assembly consists of one LEVO C LED module mounted within the cylindrical clear acrylic lens. The module consists of an aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, IV, or V optics. LED circuit boards are equipped with electrical disconnects to allow for future technology upgrades. CRI is 80+.

ELECTRICAL
Electronic LED driver supplies 700mA drive current to the LED module with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 37 watts. Optional 0-10v DC dimming is available on request.

LED DELIVERED LUMENS / BUG RATING
3000K
TYPE 2 = 3248 LMS / B1-U1-G1
TYPE 3 = 3356 LMS / B1-U2-G1
TYPE 4 = 3261 LMS / B1-U1-G1
TYPE 5 = 3542 LMS / B2-U1-G1

4000K
TYPE 2 = 3456 LMS / B1-U1-G1
TYPE 3 = 3571 LMS / B1-U2-G1
TYPE 4 = 3469 LMS / B1-U1-G1
TYPE 5 = 3768 LMS / B2-U1-G1

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

MOUNTING
Fabricated bracket assembly mounts over 3.5" or 4" octagon box and is secured to the wall in four places. Mounting bracket is finished in finely textured paint to match luminaire. Bracket assembly ships pre-wired with fish tape for ease of installation.

FINISH
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

WEIGHT: 40 lbs

EPA: 1.9 SQ FT

INGRESS PROTECTION: IP54

CERTIFICATION
CSA/US Certified for Wet Locations

WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer’s limited warranty.