®

LINEA 450G Wall

HOUSING
Rectangular luminaire housing with integral fitter is extruded 6061 aluminum with T6 temper and shows no visible welds. Individual LED arrays are sealed by the lens and a one-piece silicone gasket making a weather tight modular assembly. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. Luminaire mounts to tenon on wall bracket and secured with four socket head cap screws on top of the housing. All hardware is stainless steel.

OPTICS
Optics consist of 1 or 2 LED light engines. Each light engine consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. Optional house side shields for the individual modules are available on request.

ELECTRICAL
Each LED module is driven by an independent electronic driver. Input voltage range is 120v through 277v at 50/60Hz. Each driver supplies 700mA drive current to its respective LED module. Power consumption for single driver is 36 watts and 72 watts for models with two LED light engines. Optional 0-10v DC dimming is available on request.

LED DELIVERED LUMENS / BUG RATING
2 MODULES: 72 WATTS
Type II - 3000K: 7185 lms / B2-U0-G2
Type III - 3000K: 7196 lms / B2-U0-G2
Type IV - 3000K: 6813 lms / B2-U0-G2

Type II - 4000K: 7789 lms / B2-U0-G2
Type III - 4000K: 7800 lms / B2-U0-G2
Type IV - 4000K: 7405 lms / B2-U0-G2

2 MODULES WITH HOUSE SIDE SHIELD: 72 WATTS
Type II - 3000K: 6814 lms / B1-U0-G1
Type III - 3000K: 6805 lms / B2-U0-G1
Type IV - 3000K: 6407 lms / B1-U0-G2

Type II - 4000K: 7386 lms / B1-U0-G2
Type III - 4000K: 7377 lms / B2-U0-G1
Type IV - 4000K: 6945 lms / B1-U0-G2

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

MOUNTING
Wall mounting plate installs over the junction box and is secured to the surface in four places with hardware provided by others.

FINISH
Standard finishes are finely textured dark grey, graphite grey, silver grey, black, and dark bronze. Special colors available on request.

WEIGHT: 22 lbs

EPA: 1.3 SQ FT

INGRESS PROTECTION: IP65

CERTIFICATION
CSA Certified for Wet Locations

WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer’s limited warranty.